- CADDManager Blog - http://www.caddmanager.com/CMB -

AutoCAD 2008 – Layer Walk – Part 2

Posted By CADDManager On 2007/09/14 @ 6:22 AM In AutoCAD 2008,Tips | No Comments

[1]

Layer Walk allows you to use Filters. By using wildcards and letters you can select groups of layers for viewing. The check box tothe right allows you to turn on and off the filter.

You can also Purge layers…

You may have noticed a Purge button at the bottom of the dialog box. It is usually grayed out.

When the selected layers contain no objects, the PURGE button becomes operational. By selecting it you can purge the highlighted layers from the drawing. You may ask… “how do I know what layers are empty?” For a list of layers that can be purged, right-click anywhere in the Layer list and click “Select Unreferenced”. The unreferenced layers are then highlighted and you can purge them.

[2]

Related Posts with Thumbnails [3]
If you enjoyed this post, make sure you subscribe to my RSS feed [4]!

Article printed from CADDManager Blog: http://www.caddmanager.com/CMB

URL to article: http://www.caddmanager.com/CMB/2007/09/autocad-2008-layer-walk-part-2/

URLs in this post:

[1] Image: http://caddmanager.com/blog/uploaded_images/LayerWalk5-772783.jpg

[2] Image: http://caddmanager.com/blog/uploaded_images/LayerWalk6-716291.jpg

[3] Image: http://www.linkwithin.com/

[4] subscribe to my RSS feed: http://www.caddmanager.com/CMB/feed/

Copyright © 2009 CADDManager Blog. All rights reserved.